The Operating procedures in static load testing of driving system

未标题-1

  • The standerd of determine and gist:JIS D9301-2010
  • For static load test of driver system is standby for assembling the frame, driving device, the rear wheels, chain wheel and so on, keep the frame installed on test device vertical to ground. Lock the rear wheel by steel clamp tools to ensure no rotation. As shown below:
  • A) Bike without exchange gears Place left crank in forward level, apply the force of 1500N to the center of the left pedal, straight down the left crank for 15 seconds.As a result of the freewheel assembly status and driven structure of the tensile, bending, etc., re-continue to test by back to level or higher level position when the crank rotation above 30 degrees Carry on the same test on right crank after the left test finished.
  • B) Bike with exchange gears
    1)Adjust the chain and keep it the biggest cog of chain wheel/freewheel, than carry on test 1.
    2)Adjust the chain and keep it the smallest cog of chain wheel/freewheel, than carry on test 2